Aircore Technology¢â
QED cables above 2.5mm2 cross sectional area utilize air core technology to obviate the skin effect by bundling several separately insulated smaller cores together to make up a larger CSA. If these conductors are arranged around a hollow central core of polyethylene the self inductance exhibited by the cable can be reduced to around half that predicted by calculation.
Recommend for use with QED AirlocTM Plugs
QED developed AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ¡®cold weld¡¯ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance. |
Complementary Conductor Geometry
Utilizes conductors of different diameters to carry the same audio signal. This provides an alternative path for high frequency audio components which might otherwise become time smeared in a single audio pathway.
Specifications
Low density polyethylene dielectric
Five 99.999% Oxygen Free Copper conductors
5 low density polyethylene filler rods OD 1.02mm
AirCore¢â Technology
Jacket OD – 6.00mm
Cross Sectional Area 3 mm2
Capacitance 33.4 pF/m
Loop Inductance 0.61 µH/m
Loop resistance 0.011 §Ù/m
Dissipation Factor@10 kHz: 0.0001
Nominal outside diameter 6.0 mm |